Fenix HP35R Headlamp, Standard Edition: 4000 Lumens

Made for the professional and built for the extremes, the Fenix HP35R Rechargeable Professional Headlamp is built to perform. The rotary and button combo switch allows you to choose between different levels of spotlight, floodlight, or both—for a jaw-dropping 4000 max lumens with an almost 500-yard throw. The battery pack contains two built-in 5000mAh batteries and can be used as a power bank to charge other devices. Built into the battery case is a red safety light used for alerting others to your location. The SAR edition comes with a heat-resistant silicon strap, helmet mount, and helmet clips, whereas the standard version has a perforated black-out strap.

• Spot-and-floodlight delivers a max output of 4000 lumens and high CRI floodlight delivers a max output of 1200 lumens.
• Utilizes one XHP70 neutral white LED, two Luminus SST20 warm white LEDs; with a life span of 50,000 hours each.
• Rotary switch and electronic switch for easy and fast operation.
• Quick-release large-capacity battery case with red light function and power bank function.
• Intelligent brightness downshifting function to avoid potentially dangerous high temperature(s) at close-range lighting.
• Inner waterproof USB Type-C charging port.
• IP66 rated protection and 2 meters impact resistance.
• Flame retardant and fire resistant rubber headband and quick-assembly shroud design enable the lamp to be compatible with different types of helmets (SAR Edition only). The silicone headband can be used normally in the temperature range of -20° C to 120° C.
• Included: 2-in-1 Type-C charging cable, 2x cable clip (only one for the SAR Edition), 4 x Helmet attachment hooks (SAR Edition only), Extension cable
• Warranty: Limited Lifetime Guarantee from Fenix Lighting USA

*The SAR Edition should only be worn with a helmet. The SAR Edition is NOT compatible with the ALG-03 V2.0 and ALG-04 helmet mounts. The helmet mounts are only compatible with the Standard Edition HP35R.

Operating Instructions

On/off

• On: With the lamp switched off, turn the rotary switch clockwise from“”to any designated mode to turn on the lamp.
• Off: With the lamp switched on, turn the rotary switch counterclockwise to“” to turn off the lamp.

Mode Switching

• Turn the rotary switch to cycle through OFF⇋Spotlight⇋Floodlight⇋Spot-and-floodlight.

Output Selection

• Spotlight mode: With the lamp switched on, single click Switch A to cycle through Low→Med→High→Turbo.
• Floodlight mode: With the lamp switched on, single click Switch A to cycle through Low→Med→High→Turbo.
• Spot-and-floodlight mode: With the lamp switched on, single click Switch A to cycle through Low→Med→High→Turbo.

Red Light Mode(Battery Case)

• On/off: press and hold Switch B for 0.5 seconds.
• Output selection: single click Switch B to select between Red flashing(5 lumens) and Red constant-on(20 lumens).
• Intelligent Memory Circuit: The headlamp automatically memorizes the last selected output of each mode. When turned on again the previously used output of selected mode will be recalled.

Intelligent Brightness Downshifting Function

• Turning on/off Intelligent Brightness Downshifting Function
• On: With the lamp switched off, press and hold Switch A for 6 seconds, and the headlamp will flash twice at the Low output of Spot-and-floodlight mode, indicating that the function is enabled.
• Off: With the lamp switched off, press and hold Switch A for 6 seconds, and the headlamp will flash eight times at the Low output of Spot-and-floodlight mode, indicating that the function is disabled.

Intelligent Brightness Downshifting

• When the lamp head is close to an illuminated object (about 2.36''/60 mm) for more than 1 second, theheadlamp will automatically downshift the brightness level to Low output to avoid potential burns caused by high temperature(s). When the lamp head is moved away from the illuminated object for more than 1.2 seconds, the headlamp will automatically recall the previously used output level.

Charging

• Uncover the anti-dust cap on the battery case and plug the USB Type-C side of the cable into the port on the battery case.
• When charging, the LED indicators will flash from left to right to display the charging status. The four indicators will be constant-on after charging is completed.
• With the lamp switched off, the normal charging time is about 2 hours from depleted to fully charged.
• Compatible fast-charging protocols: PD3.0/2.0; max charging power: 27 W.

Note:

• The headlamp can be operated while charging.
• Once charging is completed, be sure to unplug the cable and close the anti-dust cover.

Power Bank Function

1. Uncover the anti-dust cap on the battery case and plug the USB Type-C side of the cable into the port on the battery case.
2. When discharging, the LED indicators will flash from right to left to display the discharging status.
3. The battery case will automatically stop discharging when the battery level is lower than 6.1 V.
4. Compatible fast-discharging protocols: PD3.0/PD2.0; max discharging power: 20 W.

Note:

• The headlamp can be operated while discharging.
• Once discharging is completed, be sure to unplug the cable and close the anti-dust cover.

Battery level indication

• With the lamp switched off, single click Switch B to check the battery status. Single click once again the indicator(s) will go out immediately, or without any operation the indicator(s) will last for 3 seconds.
• Four lights on: 100% - 80%
• Three lights on: 80% - 60%
• Two lights on: 60% - 40%
• One light on: 40% - 20%
• One light flashes: 20% - 1%

Intelligent Overheat Protection

• The lamp will accumulate a lot of heat when used at high output levels for extended periods. When the lamp reaches a temperature of 55°C/131°F or above, it will automatically step down a few lumens to reduce the temperature. When the temperature drops below 55°C/131°F, the lamp will gradually recall the preset output level.

Low-voltage Warning

• When the voltage level drops below the preset level, the headlamp is programmed to downshift to a lower brightness level until Low output is reached. When this happens in Low output, the headlamp blinks at Low output of Spot-and-floodlight mode to remind you to timely recharge the battery case.

Headband Assembly

• The headband is factory assembled by default.
• Adjust the headband by sliding the buckle to the required length.

Usage and Maintenance

• Disassembling the sealed parts can cause damage to the lamp and will void the warranty.
• Unplug the connecting cable to prevent accidental activation during storage or transportation.
• Recharge a stored headlamp every four months to maintain the optimum performance of the batteries.
• The headlamp may flicker, shine intermittently or even fail to illuminate due to poor battery level. Please recharge the battery case. If this method doesn't work, please contact the distributor.