Bipods & Monopods

AKILA H Swivel is a discreet M-LOK™ accessory that allows you to mount Harris bipod directly to the M-LOK™ interface. No tools are required to install the AKILA H Swivel, it is installed by simply sliding in from the inside and fixed with the...

Universal QD bipod base for Picatinny and ARCA rails, built on the AD-170S footprint and equipped with ADM’s TAC lever system for fast, tool-free attachment. Made in the USA. American Defense Manufacturing – QD Universal Bipod Base for...

The BT12-QK is our standard height Precision Rail Monopod (PRM) with QK01 Quick Knob. Attaches to standard Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only. NSN...

The BT13-Qk is our mid-height Precision Rail Monopod (PRM) with QK02 Quick Knob. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only. Elevation Range: 4.75...

The BT22 Atlas Leg Extensions are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless steel plunger. They provide an additional 3 inches of elevation and accept any of our optional V8, PSR or CAL feet. Sold as a pair...

The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless steel plunger. They will lay flat in the 90 degree position only. The BT23 deliver a fully articulated smooth foot to support the bipod...

The BT30-B Black Atlas Bipod Pouch accommodates all V8, Standard PSR and CAL model Atlas Bipods. They offer a pocket for the Atlas Leg Extensions and another for optional Atlas feet. It does NOT accept the 5-H, Super CAL or Tall PSR/models. Made out of...

The BT30-C Coyote Brown Atlas Bipod Pouch accommodates all V8, Standard PSR and CAL model Atlas Bipods. They offer a pocket for the Atlas Leg Extensions and another for optional Atlas feet. It does NOT accept the 5-H, Super CAL or Tall PSR/CAL models...

The BT30-R Ranger Green Atlas Bipod Pouch accommodates all V8, Standard PSR and CAL model Atlas Bipods. They offer a pocket for the Atlas Leg Extensions and another for optional Atlas feet. It does NOT accept the 5-H, Super CAL or Tall PSR/CAL models...

Since B&T Industries introduced the Atlas Bipod in 2006, the shooting community found a usefulness in its patented, novel features. We began receiving requests for a “bigger,” “heavier,” “stouter” bipod with the...

The BT43 Leveraged Rail is our BT20-B and American Defense Manufacturing's ADM-170-S lever as a complete assembly. It provides the means to quickly attach/detach any rail attached accessory. This is a direct, quick detach solution for our two-screw mount...

The BT46-LW17 PSR (Precision Sniper Rifle) Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever. It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that...

The BT47-NC PSR (Precision Sniper Rifle) Atlas Bipod “No Clamp” model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount such as the ADM-170-S, ARMS 17S, LT271 or any ARCA...

The concept of the SILO was conceived on a crop control hunt where an actual grain silo was used as a blind. One shooter, an active SOF community member, was using a bean bag strapped to the legs of his Atlas Bipod to rest his rifle on the silo’s...

The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature. The BT65-LW17 mounts directly to any 1913 style Picatinny rail via the included ADM-170-S Lever. It is comprised of 6061-T6 aluminum that is Mil-Spec...

KeyMod Bipod Mount. Contoured to fit Harris-style bipods.  

Features Extends from 13 ½” to 27 Three-piece smooth leg construction (What’s this?) Solid Base Attaches to the Sling Swivel Stud Ultralight weight – 19 oz For sitting position Tallest of the bipods, useful in snow and grass May...

Features Extends from 6” to 9” Smooth Legs (What’s this?) Solid Base Attaches to the Sling Swivel Stud Ultralight weight – 11 oz Most useful for shooting off the bench. 100% Made in the USA. Material Heat treated steel and hard...

Features Extends from 12” to 25” Three-piece smooth leg construction (What’s this?) Swivels (tilts) to compensate for uneven terrain. Attaches to the Sling Swivel Stud Ultralight weight – 21 oz Prone position From sitting the...

Features Extends from 13 ½” to 27” Attaches directly to a MLok Handguard only Three-piece smooth leg construction (What’s this?) Swivels (tilts) to compensate for uneven terrain Ultralight weight – 18.6 oz For Sitting...