Magpul MBUS Sight - Front, Stealth Gray

The MBUS (Magpul® Back-Up Sight) is a low-cost, color injection-molded, folding back-up sight. The MBUS Front Sight is adjustable for elevation and fits most 1913 Picatinny-railed hand guards, but is specifically tailored to the AR15 / M16 platform.

An elevation adjustment tool is included, but most aftermarket A2 front sight adjustment tools may be used as well.

Made in the USA.

• SPRING-LOADED FLIP UP SIGHT

  • Easily activated from either side or by pressing the top
  • Protective wings shield the spring-locking A2 front sight post

• IMPACT-RESISTANT POLYMER CONSTRUCTION

  • Polymer construction provides light weight and resists operational abuse

• DETENT AND SPRING PRESSURE KEEPS SIGHT ERECT

  • Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.

• CLAMPS TO MOST MIL-STD-1913 PICATINNY RAILS

  • Compatible with most MIL-STD-1913 Picatinny / STANAG 4694-railed hand guards* and provides the same height-over-bore as standard A2 irons

Technical Specifications

• Position: Front
• Height above rail, stowed: ~0.51 in.
• Length, deployed: 1.5 in.
• Length, stowed: 2.6 in.
• Weight, w/ hardware: 1.2 oz.
• Other Specs:
  • ELEVATION ADJUSTMENT
  • ~1.6 MOA (1.886"/100m) per click with a 14.5" sight radius
  • ~1.2 MOA (1.367"/100m) per click with a 20" sight radius
• *NOTE: Cannot be mounted to a railed gas block due to excess heat issues. Front MBUS must be mounted to a railed fore end on the same plane as the receiver rail. Because of this the sight is also not compatible with MOE Hand Guards.