Mounts

The AD-DELTA-C mount is made for putting high power glass onto a SCAR or flattop style AR15/AR10. The AD-DELTA-C is an offset scope mount with 2 inches of eye relief built in. Optic centerline height is 1.5" for 30mm rings. It is precision machined from...

The AD-RECON-S mount is made for putting high power glass onto a flattop style AR-15. The AD-RECON-S is a straight up scope mount with no eye relief built in. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize...

Scope mounts designed specifically for the Blaser R93/R8 quick detach scope mounting system.  

The difference between cheap mounts and quality mounts is imperative. For long range and accuracy, Desert Tech understands that a quality optic is only as good as the quality of mount it sits in. Desert Tech sets a new quality standard with their...

The difference between cheap mounts and quality mounts is imperative. For long range and accuracy, Desert Tech understands that a quality optic is only as good as the quality of mount it sits in. Desert Tech sets a new quality standard with their...

The SP-3601 is designed for use on rifles with MIL-STD-1913 or STANAG 4694 rails, and is especially suitable for bolt action rifles with 1-piece Picatinny rails. The SP-3601 will fit most 30 mm scope tubes except for scopes with extended erector...

Fits the 1.5x16S (M16 base), 1.5x24, 2x20, 3x24 and 3x30 ACOG models - Gen 2 Only. This quick release flatop mount clamps onto 1913 Picatinny rails.   SKU ISS3047 MPN AC12036 Variant High Distance From Top of Mounting Rail to Optical...

Available in several different sizes with options. These extended cantilevers are designed for mounting scopes with a forward location, providing correct eye relief and head placement. The cantilever ring mount positions the center of the riflescope tube...

Available in several different sizes with options for 20 MOA cant. These extended cantilevers are designed for mounting scopes with a forward location, providing correct eye relief and head placement. The cantilever ring mount positions the center of the...

These extended cantilevers are designed for mounting scopes with a forward location, providing correct eye relief and head placement. The cantilever ring mount positions the center of the riflescope tube at a height of 1.574” (40mm) from the base...

Available in several different sizes with options for 20 MOA cant. These extended cantilevers are designed for mounting scopes with a forward location, providing correct eye relief and head placement. The cantilever ring mount positions the center of the...

Vortex Pro 1 inch cantilever ring mount provides the correct height and forward placement for proper scope mounting. Torque Specs Base Clamp Screws: 30 in/lbs Ring Screws: 18 in/lbs Specifications Tube Size: 1 inch Height: 1.44 inches (36.57...

Vortex Pro 30mm cantilever ring mount provides the correct height and forward placement for proper scope mounting. Torque Specs Base Clamp Screws: 30 in/lbs Ring Screws: 18 in/lbs Specifications Tube Size: 30 mm Height: 1.44 inches (36.57 mm) Weight:...

Vortex Pro 34mm cantilever ring mount provides the correct height and forward placement for proper scope mounting. Torque Specs Base Clamp Screws: 30 in/lbs Ring Screws: 18 in/lbs Specifications Tube Size: 34 mm Center Scope Height: 1.44"

The 2" offset gets your head position and eye relief dialed, while leaving plenty of real estate on your rail. Lightweight, but with the power to stand up to recoil and the rigors of range day, these mounts get you shooting faster and easier, with...

The 2" offset gets your head position and eye relief dialed, while leaving plenty of real estate on your rail. Lightweight, but with the power to stand up to recoil and the rigors of range day, these mounts get you shooting faster and easier, with...