- Special edition with grey colored Cerakote® H-Series surface coating
- 50,000 hours (over 5 years) of operation on one battery
- Submersible to 35 meters (115 feet)
- Weight 61 g (2.2 oz) sight only
- Optimized for pistol and applications which require a low-profile red dot system
- Height of Optical Axis 14 mm (0.6 in) measured from top surface of mechanical interface
- 4 night vision compatible settings and 6 daylight settings
- 3.5 MOA dot size
The Aimpoint® Acro P-2 is the next generation in the Acro series with an optimized technology.
With the new battery size of CR2032 and new diode technology the Acro P-2 will last for 5 years of continuous use on setting 6/10 (daylight setting). The new design of the Acro P-2 makes the system submersible to 35 meters (115 feet). The new LED gives you a brighter 3.5 MOA dot.
The Acro P-2 can be mounted on a wide range of weapon platforms in combination with different mounting solutions developed especially for this small red dot optic. It can be used as a backup sight for magnifying scopes, personal defense weapons, and any area where a small red dot system is applicable. It is trusted by law enforcement, military, hunters, and sport shooters alike. They all rely on the Acro advantage.
The rugged and reliable Acro P-2 is the smallest professional grade, enclosed red dot sight for pistols and other platforms.
The Acro P-2 Sniper Grey has a Cerakote® H-Series surface coating with grey housing.
General Specifications |
Size L x W x H |
47 x 33 x 31 mm / 1.9 x 1.3 x 1.2 in |
Weight |
61 g / 2.2 oz |
Dot Size |
3.5 MOA |
Magnification |
1X - No Magnification |
NVD Compatible |
Yes |
Transmission |
Average 70% in the range 420 - 900 nm |
Eye Relief |
Unlimited |
Mounting Solution |
Integrated Acro™ Interface |
Mounting Platform |
Acro™ Interface |
|
|
Optical Information |
Dot Size |
3.5 MOA |
Magnification |
1X - No Magnification |
NVD Compatible |
Yes |
Transmission |
Average 70% in the range 420 - 900 nm |
Eye Relief |
Unlimited |
Dot Color |
Red |
Light Source Wavelength |
650 nm red light |
Optical Coating |
Anti-reflex coating all surfaces and multilayer coating objective lens |
Clear Aperture |
15 × 15 mm / 0.59 × 0.59 in |
Parallax |
Operationally parallax free - No centering required |
Diode |
LED (Light Emitting Diode) totally eye safe |
|
|
Power Source Information |
Battery Life |
50,000 h at daylight setting 6 (15,000 Lux, room temperature) |
Battery Type |
CR2032, 3V, Lithium |
Power Switch |
Push buttons |
Daylight Settings (DL) |
6 |
|
|
Mounting Specifications |
Torque - Mount to Sight |
3.0 Nm / 27 in-lbs |
Torque - Mount to Rail |
3.0 Nm / 27 in-lbs |
Mounting Solution |
Integrated Acro™ Interface |
|
|
Physical Information |
Material Housing and Tube |
High Strength Aluminum |
Lens Covers |
Not included |
Adjustment 1 click = |
1 click = 20 mm at 100 m / 0.7 in at 100 yds |
Color Housing |
Sniper Grey |
Surface Finish Housing |
Cerakote® H-Series surface coating |
Size L x W x H - Sight Only |
47 x 33 x 31 mm / 1.9 x 1.3 x 1.2 in |
Size L x W x H |
47 x 33 x 31 mm / 1.9 x 1.3 x 1.2 in |
Weight - Optic Only |
61 g / 2.2 oz |
Weight |
61 g / 2.2 oz |
|
|
Technology Information |
Operating Principle |
Reflex collimator sight - red dot sight |
|
|
Environmental Information |
Water Resistant |
35 m / 115 ft |
Operating Temperature |
- 45°C to + 71°C / - 49°F to + 160°F |
Storage Temperature |
- 51°C to + 71°C / - 60°F to + 160°F |
Temperature Shock |
Operable after a temperature shock between - 45°C and + 71°C (- 49°F and + 160°F) |
Humidity |
Operable during and after Humidity. Limits: RH: 95%, Temp: +20°C to +50°C (+68°F to +122°F), cyclic |
Vibration |
Withstands Vibration. Limits: Vibration, sinusoidal in a frequency range of 10-150 Hz. Frequency: 10-30 Hz, ±1.587 mm, Frequency: 30-150 Hz. 5.75 g, 1 octave/min. Direction: X, Y and Z, Time: 30 min/direction. |
Shock |
Tested with 20,000 rounds mounted on a .40 S&W caliber pistol slide |