Gear

These AR500 Round Targets are cut from 3/8″ steel plate and measure 6″, 8″ and 10″ in diameter. They’re designed for use with pistols and rifles and can handle rounds such as 9mm, .40 S&W and .223 Rem. The targets...

Keep up your training with this 2/3 IDPA steel target. Used in practical self-defense scenarios, the IDPA silhouette challenges shooters to become more accurate and effective. Designed to mount easily on our Speed Stand at a safe downward angle, you can...

This IPSC Steel Octagon Target is cut from 1/4″ AR500 steel. We’ve produced this at full size so you know whatever distance you place it at, you’re always practising on a competition-size IPSC Target. It’s designed primarily for pistol shooting – 9mm and...

This IPSC A Zone Target is cut from 1/4″ AR500 steel. Don’t be fooled by the thickness – this target can withstand a beating. Designed for pistol shooting, 9mm and .40 S&W are no match for this steel. We’ve cut this at full...

Our AR 500 gongs are cut from 3/8″ plate and measure 9″x9″. Bigger and stronger than our AR 450 gongs, these plates weigh nearly 9 lbs. and are designed for larger rounds. The steel can withstand impacts from 7.62×39, .308, .223, ...

Meet the brick wall to your 50 BMG. This 1/2″ thick E-Type Silhouette steel target is made not from AR500 steel, but an even harder AR550 material. It’s stronger, bigger, and more durable than our AR500 steel targets, and for good reason. At...

This 8” Knock-Over Octagon Target is great for short to medium distance shooting. Use it to run quick-shooting drills or use as part of a multigun stage. Your hits on target are verified by the target falling over – no guess work needed. It...

Meet the brick wall to your 50 BMG. This 1/2″ thick steel target is made not from AR500 steel, but an even harder AR550 material. It’s stronger, bigger, and more durable than our AR500 steel targets, and for good reason. At just 150 yards...

You enjoy the ease of using a 2×4″ for your stand vertical and want to make each piece last longer. No problem. This AR500 Guard Plate is designed to minimize damage to your post and greatly extend the time between replacements. By...

Handy Andy returns from the grave to eat some lead! Take him to the range or out in the bush and send him back 6′ under. Great for pistol and rimfire, this target is made from 3/16″ AR450 – the same tough material used for our pistol...

Use this hardware package to hang your Drummond Shooting gong. Insert the carriage bolts through the square holes on your gong, place one end of the chains over carriage bolts, followed by washers and then nuts. Connect the other ends of the chain to...

Use this hardware package to hang your Drummond Shooting gong. Insert the carriage bolts through the square holes on your gong, place one end of the chains over carriage bolts, followed by washers and then nuts. Connect the other ends of the chain to...

Challenge your shooting skills with LinkPac by hanging multiple targets on the same stand. Practice rapidly changing your point of aim and get instant feedback from your steel gongs. Easily holding up to 3 gong targets, this setup remains incredibly...

This post topper target hanger is a simple and effective way to hang steel targets. The hanger peg made from AR500 steel is strong enough to take direct hits from many pistol and rifle rounds which makes it a great alternative to bolts. Slip the peg...

This post topper target hanger is a simple and effective way to hang steel targets. The hanger peg made from AR500 steel is strong enough to take direct hits from many pistol and rifle rounds which makes it a great alternative to bolts. The two sets of...

The Speed Stand 3 is designed to work with both our AR500 Steel Targets and 2/3 IDPA Steel Targets. We updated our Speed Stand 3 design to offer a simplified, no-tools-required setup and takedown. The base assembles solidly with only a single detent pin,...

Have a steel target but don’t know how to hang it? These target stand brackets are a great solution that will have you set up and shooting in no time! Save yourself awkward, heavy all-metal target stands that are expensive, difficult to transport...

These upsized 2×4 Locking Target Stand Brackets, designed for our AR550 Gong and other heavy targets, are a great solution that will have you set up and shooting in no time! Extra stability from a wider stance and locking bolts make these the...

These super-durable rubber straps are an excellent alternative to chain for hanging steel targets. The elastic, self-healing rubber withstands dozens of rounds before failure*. Simply clip the strap to your Stand Brackets with the supplied quick link,...

Add an extra challenge to your workout and training routines with our Canadian-made Weight Vest Plates. Each plate is formed with a slight contour to reflect the body’s natural shape. This helps to distribute weight evenly and keep you comfortable...

Add an extra challenge to your workout and training routines with our Canadian-made Weight Vest Plates. Each plate is formed with a slight contour to reflect the body’s natural shape. This helps to distribute weight evenly and keep you comfortable...

Add an extra challenge to your workout and training routines with our Canadian-made Weight Vest Plates. Each plate is formed with a slight contour to reflect the body’s natural shape. This helps to distribute weight evenly and keep you comfortable...

The ESD Swivlah is a product that optimizes the way you work with your Safariland QLS system and thigh strap. This small piece of Tegris relocates your thigh strap and allows for freedom of movement using human-centered design. The addition of a thigh...

The ESD Sap Bucket is our solution to all the problems our team and our end users experience with dump pouches. The ESD Sap Bucket is a dump pouch that aids in gear retention, increases consistency when inserting equipment, drains sand, water and snow...

The ESD Sap Bucket is our solution to all the problems our team and our end users experience with dump pouches. The ESD Sap Bucket is a dump pouch that aids in gear retention, increases consistency when inserting equipment, drains sand, water and snow...

The ESD Sap Bucket is our solution to all the problems our team and our end users experience with dump pouches. The ESD Sap Bucket is a dump pouch that aids in gear retention, increases consistency when inserting equipment, drains sand, water and snow...

The ESD Sap Bucket is our solution to all the problems our team and our end users experience with dump pouches. The ESD Sap Bucket is a dump pouch that aids in gear retention, increases consistency when inserting equipment, drains sand, water and snow...

The ESD Sap Bucket is our solution to all the problems our team and our end users experience with dump pouches. The ESD Sap Bucket is a dump pouch that aids in gear retention, increases consistency when inserting equipment, drains sand, water and snow...

The Hikers First Aid kit is a three compartment fanny pack that offers easy access to the contents. The kit is compact and lightweight and is packed with items to help in many cases of injury when hiking. The kit comes shrink wrapped with list of...

Provides immediate visual recognition of an empty chamber. Can be used on multiple weapon platforms including semi-auto pistols Constructed of semi-rigid polymer High Visibility colors 3-Pack  

Provides immediate visual recognition of an empty chamber. Fits 12, 16, or 20 gauge Constructed of semi-rigid polymer High Visibility colors Two Pack  

Compatible with 9mm, 40 S&W, 45 ACP Single Stack 1911 magazines. Each pouch includes 1x Malice Clip.

The Fenix AER-02 V2.0 is an upgraded model of our popular remote pressure switch. The perfect accessory for your rail mounted flashlight, this remote switch allow you quickly turn on/off your flashlight or select momentary on with the noiseless (no...

The Fenix AER-04 tactical remote switch is the perfect accessory for your rail mounted flashlight. This remote switch allow you quickly select momentary on of the brightest level with the pressure pad or constant on with the tactical switch. Easily...

The Fenix AER-05 tactical remote switch is the perfect accessory for your rail mounted flashlight. This remote switch allow you quickly select momentary Strobe with the pressure pad or momentary on/constant on of the brightest level with the tactical...

Convert your flashlight into a highly visible, glowing orange traffic wand with the Fenix AOT-S+ traffic wand flashlight attachment. It’s the best option for emergency situations, traffic control and emitting SOS. AOT-S+ Size: Length: 7.1”...

The Fenix E18R V2.0 is an ultra-compact EDC (every day carry) flashlight with outstanding performance for a flashlight this small. Powered by one included 16340 li-ion battery, the E18R V2.0 emits a maximum of 1200 lumens a distance of 479ft (146m). The...

The long awaited upgrade to Fenix’s best selling headlamp, the Fenix HM50R V2.0, has everything you have come to love plus added performance and new features. Super small and light weight, this headlamp can now blast a maximum 700 lumens 377ft. The...

The Fenix HM60R V2.0 Rechargeable Headlamp takes one of our most popular headlamps and cranks it up a few notches. Now pushing 1600 lumens with a beam that reaches 558 feet (170 meters), this upgraded version shines brighter, runs longer, and is easier...

The Fenix HM65R-T V2.0 Rechargeable Headlamp has been upgraded to be the most comfortable hands-free lighting tool on the market. The new SPORT fit headband is larger, has an improved rotary adjustment dial for more precise control, and includes a...