Peak 44 Blacktooth Remington 700 Universal Stock: Long Action, Right Hand, Remington BDL Bottom Metal Inlet, Proof Research Carbon Sendero Barrel Contour, Dark Grey & Light Grey, Model 6023-K35

Coming in at 20 ounces, the Blacktooth reigns supreme as the lightest production carbon fiber stock on the market.

Features & Specs

• Weight: 20 ounces
• Length of Pull: 13.25"
• Carbon Bedding Block
• Negative Comb
• Advanced Ergonomics
• 3D Hex Recoil Pad

What is Action Length?

Action length is the distance between the front and rear action screws. These screws are found on the bottom of the stock fore and aft of the trigger and magazine/loading port, which hold the barreled action to the stock.

When taking this measurement remember to measure from the middle of one hole to the middle of the other hole. Also, do not mistake the trigger guard screws for action screws. Since the difference between a short or long action can be as little as ½-inch either mistake can be critical.

Another means of identifying action type- is the cartridge type. In most cases cartridges measuring less than 2.8″ will utilize a short action. Long actions will not exceed 3.340″. Calibers larger than this will generally use a magnum action, or a special purpose action specifically designed for that cartridge.

What is Barrel Contour?

Peak 44 stocks are based on a tapered Sporter Contour. Tapered contour barrels have a radius that starts 2.750” from the breach and creates a smooth transition to each taper diameter. Options include #1 #2 and #3 contours. The Sendero Contour is a custom sporter sized between #3 and #4 Sporter.

Please Note: A Remington 700 Universal Footprint is designed to be compatible with many aftermarket custom Remington 700 actions. The Rem700 Universal has a longer ejection port and cutout for the bolt release to accommodate a variety of Rem 700 Clone actions.

A partial list of compatible custom Remington 700 action manufacturers are: American Rifle, Bat, Zermatt, Borden, Curtis Custom, Defiance, GA Precision, Mesa, Stiller, Terminus, Gunwerks.

TYPICAL CHAMBERINGS ON THIS ACTION TYPE

• LONG ACTION
  • COMMON CHAMBERINGS
    6.5 PRC (can be long or short, please check with your manufacturer), 270 WIN, 7MM REM MAG, 28 NOSLER, 280 ACKLEY IMP, 300 WIN MAG, 30-06 SPRG, 300 PRC
    
    
  • ADDITIONAL CHAMBERINGS
    25-06 REM, 6.5-300 WBY MAG, 26 NOSLER, 6.5-284 NORMA MATCH, 6.5×55 SWEDISH MAUSER, 264 WIN MAG, 27 NOSLER, 280 REM, 7 STW, 7MM MAUSER, 300 RUM, 30 NOSLER, 338 WIN MAG, 338 LAPUA, 33 NOSLER, 338 RUM, 35 WHELEN, 9.3x62MM MAUSER, 375 H&H, 375 RUGER

BARREL CHANNEL MEASUREMENTS

Dimensions are +/-.010 inches. We recommend a minimum of .02 inches of clearance between the barrel and stock. Some hand filling may be required.

HINGED FLOOR PLATE INFORMATION & MEASUREMENTS

Fits Remington 700 and Remington Compatible actions.

• Works with factory BDL bottom metal