Peak 44 Blacktooth Tikka Stock: Right Hand, Proof Research Carbon Sendero Barrel Contour, Black Carbon Sponge, Model 6031-K55

The Blacktooth Tikka stock accepts Tikka Factory 3+1 polymer detachable box magazines.

Coming in at 20 ounces, the Blacktooth reigns supreme as the lightest production carbon fiber stock on the market.

Features & Specs

• Weight: 20 ounces
• Length of Pull: 13.25"
• Carbon Bedding Block
• Negative Comb
• Advanced Ergonomics
• 3D Hex Recoil Pad

What is Action Length?

Action length is the distance between the front and rear action screws. These screws are found on the bottom of the stock fore and aft of the trigger and magazine/loading port, which hold the barreled action to the stock.

When taking this measurement remember to measure from the middle of one hole to the middle of the other hole. Also, do not mistake the trigger guard screws for action screws. Since the difference between a short or long action can be as little as ½-inch either mistake can be critical.

Another means of identifying action type- is the cartridge type. In most cases cartridges measuring less than 2.8″ will utilize a short action. Long actions will not exceed 3.340″. Calibers larger than this will generally use a magnum action, or a special purpose action specifically designed for that cartridge.

What is Barrel Contour?

Peak 44 stocks are based on a tapered Sporter Contour. Tapered contour barrels have a radius that starts 2.750” from the breach and creates a smooth transition to each taper diameter. Options include #1 #2 and #3 contours. The Sendero Contour is a custom sporter sized between #3 and #4 Sporter.

TYPICAL CHAMBERINGS ON THIS ACTION TYPE

• COMMON CHAMBERINGS
  223 REM, 243 WIN, 270 WIN, 270 WSSM, 30-06 SPRG, 300 WIN MAG, 300 WIN SHORT MAG, 308 WIN, 6.5 CREEDMOOR, 6.5 PRC, 7MM REM MAG 7MM-08 REM

BARREL CHANNEL MEASUREMENTS

Dimensions are +/-.010 inches. We recommend a minimum of .02 inches of clearance between the barrel and stock. Some hand filling may be required.