KIDD .22LR Ultra Lightweight Black Fluted Barrel Threaded | KIDD-22BRL-UL-B-TC

Choose the ultra-light fluted barrel when you want the lightest carry, dependable KIDD engineering, and match-capable performance in a compact package.

Upgrade your 10/22® with an ultra-light, fluted match barrel that trims carry weight while keeping KIDD-level fit and function.

What makes it special

• Featherweight performance: At ~1 lb 4 oz this is KIDD’s lightest production rifle barrel—ideal for shooters who want minimal carry weight without giving up accuracy.
• Smart contouring: Starts as .920" for the first 2" then tapers to .876", preserving stiffness where it matters and trimming mass toward the muzzle.
• Stainless-steel breech & muzzle: A durable steel liner anchored at both ends provides strength and repeatable alignment while keeping the package ultra-light.
• Match-capable design: Bored & rifled by Lothar Walther (Germany) and finished/assembled by Tony Kidd; proprietary chamber reamer and hand QC ensure smooth feeding.
• Reliable extraction & crown: Precision convex extractor slot and an 11° crown + double ring at the muzzle for consistent termination and appearance.
• Accessory-ready: Muzzle threading 1/2"-28 available with protective cap.

Key specs

• Weight / Length: 1 lb 4 oz; available in 16¼" or 16¾" (threaded version)
• Profile: .920" for first 2" then .876" to muzzle (fluted sleeve)
• Construction: Stainless-steel breech & muzzle with lightweight liner/core
• Twist: 1:16 (optimized for .22 LR)
• Crown: 11° crown + double ring; KIDD marked
• Extractor slot: Convex precision-cut for reliable extraction
• Muzzle threading: 1/2"-28 (protective cap)
• Accuracy: Testing and customer results show capable of ½" at 50 yards (not guaranteed)

Barrel weight

• Ultra-light 16¼ / 16¾ — 1 lb 4 oz

Fitment & avoiding barrel droop

Barrel droop is caused by an insecure or inconsistent tenon/shoulder fit. We eliminate droop with:

• A precise fit between tenon and receiver, with a consistent diameter along the tenon length.
• A precisely machined shoulder with a relief cut to allow the shoulder to seat flush against the receiver providing full support.

When properly fitted, v-block screws only need to be snug (~10 in-lb) — tight enough to prevent forward movement without distorting alignment.

Installation tips

• If using another brand of receiver clean paint/build-up from the receiver mortise before installing.
• Apply a light coat of grease to the tenon to ease installation—use sparingly.
• Begin inserting the tenon while aligning the extractor slot. Tap the rear of the receiver with your palm; if resistance increases, use a rubber mallet to fully seat.
• Recheck extractor alignment by matching the level of the receiver’s bottom flat with the barrel’s v-block cutout.
• Run two magazines through the barrel before evaluating groups, and repeat when changing ammunition brands.
• Keep the chamber clean but avoid over-cleaning the bore—excessive cleaning can reduce accuracy. Typical bore cleaning interval~ every 500 rounds, depending on ammo